Post your toys! Vol. 1?

[redrum3281]

Been enhancing my Neca TMNT collection

I was never cool with how small Splinter was so I replaced his body with Sota Gen he's still shorter than Shredder but not incredibly smaller like he was, plus now he looks more formidable

Casey sits on an Oldman Hawkeye body bcuz I didnt like his bummy look

 

[Shoezilla_R35]

I have so many more toys but this is all I have displayed in my office

 

[415SFC]

"Just remember ALL CAPS when ya spell the man name"

 

[redrum3281]

The red piece looks less vibrant but that’s cause it’s al
Smudged up with the panel wash. Once I properly clean it off and add another layer of gloss coat it’ll look normal again! And yeah man Kyshatriya is a beast. A buddy of mine has been trying to get me to buy it off him for about 2 years now but the price wasn’t right. Finally was able to get him to come down to a price that made sense for me because I’m actually going to build and paint it. Which pretty much destroys the value until it’s done. Very excited eventually start it. Bandai made that excuse for Kyshatriya almost a decade ago, I think between the hi resolution line and the new master grade extreme line we’ll get one soon.

But I’ve gotta finish Zerstore before starting another mechanicore kit.


figure out how I’m going to afford this years mechanicore release that I most likely wouldn’t touch until 2022

also working on my first Resin kit.

where did you get these from? i feel like that would help tremendously with my customs and not having to paint them a piece at a time while holding in my hands lol

 

[redrum3281]

so i've been using McF figs (because they're super easy to take a part) to create inspired Darksiders customs. Here's War all finished up

next to him is a idea test for Death on his left and the almost completed ver. of Strife on his right. War uses McF Azrael upper, McF Az Bats hands, McF Doom Marauder lower and forearm/hand armor, McF Aries fig knee pads for knee pads, Neca GoW Ares armor Kratos shoulder pads and sword for the Chaos Eater, and MotUC Ram stone for the belt buckle. Painted, washed, and sealed with all kinds of diff brand paints lol. This was my first time doing a wash so i'm really happy how he turned out. Strife is almost done, just have to paint up his scarf so pics coming soon.

 

[frenchbreadbuilds]

where did you get these from? i feel like that would help tremendously with my customs and not having to paint them a piece at a time while holding in my hands lol

you talking about the alligator clips?

 

[redrum3281]

you talking about the alligator clips?

yeah, i need to look into those to hold the parts while i paint and drying, do they come with that giant stand and the rods that they're on?

 

[redrum3281]

Sorry for the double post but i just finished my Strife

Strife was made using McF Red Hood torso, McF Deathstroke arms and legs, McF Skull Trooper feet, McF Strain scarf, McF random Spawn figure skulls, ML Odin belt, KO Revoltech Overwatch Reaper hands and guns, hair is ML Morbius with MCU Ultron head. Head to cut, dremel and super glue both parts together to make it work. The eyes turned out bigger than i would've liked but meh

Here's a preview of how Death's coming along. he'll be the most detailed figure i've done bcuz of the jacket and using the game as inspiration, should be able to finish him by Friday i think

 

[frenchbreadbuilds]

yeah, i need to look into those to hold the parts while i paint and drying, do they come with that giant stand and the rods that they're on?

I get them from amazon!
DIAOSnx Set of 50 Metal Wire Alligator Clamp Long-Tailed Alligator Iron Clip Clasp for DIY Card Photo Memo Clip Holder 6inch (150mm) Amazon product ASIN B01LYFCBAI

 

[redrum3281]

I get them from amazon!
DIAOSnx Set of 50 Metal Wire Alligator Clamp Long-Tailed Alligator Iron Clip Clasp for DIY Card Photo Memo Clip Holder 6inch (150mm) Amazon product ASIN B01LYFCBAI

And bought, thanks a million, you the real customizing MVP

Where or what are you using as the base thats holding the Alligator clips?

 

[frenchbreadbuilds]

And bought, thanks a million, you the real customizing MVP

this Gonna sound funny but get a cat scratch board so that you have a stand for all of your painted parts on alligator clips

 

[redrum3281]

this Gonna sound funny but get a cat scratch board so that you have a stand for all of your painted parts on alligator clips

Thanks I had just edited my post to ask about that

 

[frenchbreadbuilds]

Progress on my first resin kit! Gonna table this for a bit while I work on some content

 

[albooboo5]

My new NECA Super Shredder

 

[frank mucus]

Just arrived today.

Hot Toys Iron Man Mark LXXXV

 

[Thierry Henry]

Progress on my first resin kit! Gonna table this for a bit while I work on some content

Is that a conversion kit or full resin?

I see the mark setter & softer in the back, i think gsi creos makes something similar.

 

[redrum3281]

Progress on my first resin kit! Gonna table this for a bit while I work on some content

I can't thank you enough for helping me not have as much paint on my hands

Continuing to work on Death, though if you didn't know any better you'd think it was Skeletor. I decided that I loved the scythe I made so I paid a crap ton of money and order the figures that have the accessories to make another one

 

[albooboo5]

ivedone more blue than red. I have done heavy arms if that counts for anything.



I do have some red kits in the queue though been itching to do something red . I’ve got the Sazabi with the AnchoreT resin conversion

and the Sinanju OVA with Takumi Studio Plastic Conversion

that thing is sick! Gundams are trippy as hell sometimes lol

 

[dcypoe81]

$700 + tax

Transformers Optimus Prime Auto-Converting Programmable Robot - Collec

Estimated ship date subject to change, items may ship earlier or later than anticipated without noticePayment will be collected once item is ready to ship Introducing an industry first Auto-Converting, Interactive, Programmable, Voice Activated, Mobile Controlled - Optimus Prime Robot. In...

hasbropulse.com

 

[GL Rayner]

I lost my mind when Jay and Silent Bob unveiled it. Then, reality hit when I saw the price...

 

[mork23]

Finally got to open this(been busy for awhile) and post it here

 

[Thierry Henry]

Finally got to open this(been busy for awhile) and post it here

this is from the Maccross universe right?

 

[mork23]

this is from the Maccross universe right?

Yes, from the original Macross and Macross Frontier

 

[SC kid]

This thread should be in the general forum.

 

[bboy916]

Joker and Crow (Brandon Lee): Hypebeast edition