ADIDAS X YEEZY COLLAB OFFICIAL 2017 THREAD *NO LC's PLEASE*

Status
Not open for further replies.
Regarding the Blue Tints, do you think they will fit like the Beluga 2.0s and as a result, we should go up half a size? Or just stick with your typical v2 size?

I can make my Beluga 2.0s work, but would have preferred if I had gone up half a size.

I'm perplexed on what size to get for the Blue Tints. Without a doubt, my size 10 Zebras fit bigger than my similarly sized "Beluga 2.0s"; 10.5 in Zebras were too big. I have yet to wear my Breds, but I think they may fit similar to the "Beluga 2.0s". I can and do wear my size 10 "Beluga 2.0s", but I definitely would have preferred a half size bigger.

So should I go for a 10.5 or 10 in the Blue Tints?
 
anybody get their footpatrol pairs in? tracking been stuck since 8 days ago from miami...
 
Finally got the email my 2.0 made it off slowPS truck to stockx now hopefully they can keep the ball rolling and legit check and ship em out before blue tints release
 
Just got my pair of 2.0's in from YS and something seems off. First and foremost is the fit. They fit considerably bigger than the pair I got in-store on release day from Kicks USA. The in-store pair are hella tight, even after removing the insoles. Whereas the YS pair fit comfortably, even with the in-sole still in. Secondly, the pull tab on the in-sore pair has a lot of room in between, whereas the YS pair doesn't. I also noticed that there is bulge where the back of the shoe meets the sole on the YS pair. That same section is flat on the KUSA pair. Also, the YS pair came with 2 hang tags on the right shoe and no sticker inside. This is my first pair of V2's so if some of this is already common knowledge, I apologize. It just took me by surprise how the same exact pair of shoes, that are the exact same size can fit so differently. The YS pair was made 06/17, and the KUSA pair was made in 07/17. The overall shape and craftsmanship is hands down better on the KUSA pair. Is this just a case of different production dates, different batch? Or did YS send me b-grades? Lol.

KUSA on the left...YS on the right. Notice the space difference between the pull tab.
IMG_20171207_132326.jpg


YS on the right. Notice the bulge where the material meets the sole.
IMG_20171207_132143.jpg


YS pair with the bulge...
IMG_20171207_132220.jpg


Kicks USA with no bulge.
IMG_20171207_132157.jpg


Notice how much wider the shoe on the right is compared to the one on the left. Focus on the 3 stripes.
IMG_20171207_132710.jpg
 
Just got my pair of 2.0's in from YS and something seems off. First and foremost is the fit. They fit considerably bigger than the pair I got in-store on release day from Kicks USA. The in-store pair are hella tight, even after removing the insoles. Whereas the YS pair fit comfortably, even with the in-sole still in. Secondly, the pull tab on the in-sore pair has a lot of room in between, whereas the YS pair doesn't. I also noticed that there is bulge where the back of the shoe meets the sole on the YS pair. That same section is flat on the KUSA pair. Also, the YS pair came with 2 hang tags on the right shoe and no sticker inside. This is my first pair of V2's so if some of this is already common knowledge, I apologize. It just took me by surprise how the same exact pair of shoes, that are the exact same size can fit so differently. The YS pair was made 06/17, and the KUSA pair was made in 07/17. The overall shape and craftsmanship is hands down better on the KUSA pair. Is this just a case of different production dates, different batch? Or did YS send me b-grades? Lol.

KUSA on the left...YS on the right. Notice the space difference between the pull tab.
IMG_20171207_132326.jpg


YS on the right. Notice the bulge where the material meets the sole.
IMG_20171207_132143.jpg


YS pair with the bulge...
IMG_20171207_132220.jpg


Kicks USA with no bulge.
IMG_20171207_132157.jpg


Notice how much wider the shoe on the right is compared to the one on the left. Focus on the 3 stripes.
IMG_20171207_132710.jpg

Check the factory inside.
 
Just got my pair of 2.0's in from YS and something seems off. First and foremost is the fit. They fit considerably bigger than the pair I got in-store on release day from Kicks USA. The in-store pair are hella tight, even after removing the insoles. Whereas the YS pair fit comfortably, even with the in-sole still in. Secondly, the pull tab on the in-sore pair has a lot of room in between, whereas the YS pair doesn't. I also noticed that there is bulge where the back of the shoe meets the sole on the YS pair. That same section is flat on the KUSA pair. Also, the YS pair came with 2 hang tags on the right shoe and no sticker inside. This is my first pair of V2's so if some of this is already common knowledge, I apologize. It just took me by surprise how the same exact pair of shoes, that are the exact same size can fit so differently. The YS pair was made 06/17, and the KUSA pair was made in 07/17. The overall shape and craftsmanship is hands down better on the KUSA pair. Is this just a case of different production dates, different batch? Or did YS send me b-grades? Lol.

KUSA on the left...YS on the right. Notice the space difference between the pull tab.
IMG_20171207_132326.jpg


YS on the right. Notice the bulge where the material meets the sole.
IMG_20171207_132143.jpg


YS pair with the bulge...
IMG_20171207_132220.jpg


Kicks USA with no bulge.
IMG_20171207_132157.jpg


Notice how much wider the shoe on the right is compared to the one on the left. Focus on the 3 stripes.
IMG_20171207_132710.jpg

large production runs means larger variances between pairs. All the things youve mentioned are generally things that have been said at every release
 
Just got my pair of 2.0's in from YS and something seems off. First and foremost is the fit. They fit considerably bigger than the pair I got in-store on release day from Kicks USA. The in-store pair are hella tight, even after removing the insoles. Whereas the YS pair fit comfortably, even with the in-sole still in. Secondly, the pull tab on the in-sore pair has a lot of room in between, whereas the YS pair doesn't. I also noticed that there is bulge where the back of the shoe meets the sole on the YS pair. That same section is flat on the KUSA pair. Also, the YS pair came with 2 hang tags on the right shoe and no sticker inside. This is my first pair of V2's so if some of this is already common knowledge, I apologize. It just took me by surprise how the same exact pair of shoes, that are the exact same size can fit so differently. The YS pair was made 06/17, and the KUSA pair was made in 07/17. The overall shape and craftsmanship is hands down better on the KUSA pair. Is this just a case of different production dates, different batch? Or did YS send me b-grades? Lol.

KUSA on the left...YS on the right. Notice the space difference between the pull tab.
IMG_20171207_132326.jpg


YS on the right. Notice the bulge where the material meets the sole.
IMG_20171207_132143.jpg


YS pair with the bulge...
IMG_20171207_132220.jpg


Kicks USA with no bulge.
IMG_20171207_132157.jpg


Notice how much wider the shoe on the right is compared to the one on the left. Focus on the 3 stripes.
IMG_20171207_132710.jpg
the-glasses-seinfeld-george-eating-onions-spotting-dimes.jpg
 
Status
Not open for further replies.
Back
Top Bottom