Computer Saavy Brahs, HELP ME PLEASE

calibeebee

Supporter
Joined
May 6, 2007
Messages
21,332
Reaction score
30,633
Okay, I'm thinking there is no possible way to do this on my own, but maybe NT has some help

How do I change the NAT settings on my router from strict, to open?

I have a mac

My roommate has a pc

I want to change the settings so that I can connect with ALL my friends on xboxlive.  Right now, I cannot connect with people who have their settings to open.  Anybody know an easy way to fix this?
 
what kinda router?

usually to login to a router is 192.168.1.1

then the default username is admin and the pass is password

go through the settings and change it
 
Originally Posted by odog24

what kinda router?

usually to login to a router is 192.168.1.1

then the default username is admin and the pass is password

go through the settings and change it
 
Originally Posted by Vendetta

Get a PC

Nicolas%20Cage%20Laugh.gif
 
i have a $%#%*+* pc also ******s. get outta here with that bull
 
roll.gif
roll.gif
roll.gif


At people in here thinking that computer types have anything to do with the network routing of a gaming console.
 
Originally Posted by calibeebee

i have a $%#%*+* pc also ******s. get outta here with that bull
interesting development...
ibo9XsjRL2XscC.gif
 
BEFORE YOU ADVANCE REALIZE THIS METHOD ONLY AFFECTS XBOX AND NOT THE REST OF THE NETWORK.

2NDLY YOU MUST HAVE A ROUTER WITH NAT AND DMZ.

I'm saying that because some ppl might need their parents to help them with this, rest assured your pc's willl be inaffected by anything I'm going to have you do/try.

I'm going to try to clear up some NAT issues using DMZ.

My NAT was on Moderate. It took me awhile but I finally figured out how to fix this problem.

Ok before we go any farther you need to have all of the following things handy, or get them.



1. Your Routers Username and Password (Most are admin and admin)
2. Your xbox's IP. (Get it from dashboard under network settings.)
3. Your Routers address(usually 192.168.1.1) Look below for how to get it just to double check it

Allright now alittle terminology for you ppl

NAT - Network Adress Transmission
DMZ - De-Militarized Zone - The zone not affected by the router




HOW TO GET YOUR ROUTERS IP ADDRESS ------- VERY IMPORTANT

Start------> Run
Type in cmd
Click Ok

in the command prompt type ipconfig
The Default Gateway is your Router's IP Address

Thanks once again to savj14




Now onto the good part, getting your NAT to Open.

For Routers that have UPnP capabilities, this the only option you will need. With that being said do the following:

1. Set your Xbox 360's IP To Automatic
2. Disable DMZ
3. Remove Port Forwarding Entries.
4. ENABLE UPnP

You should now be all set.

Thanks to Savj14 yet again.

Step-by-Step Instructions If you don't have uPnP.

1. Login in to your router site.

2. Find your DMZ settings

3. There should be a local and a public setting.

4. Type your xbox's IP into the local DMZ host IP box.

5. Hit Apply or Accept or w/e.

6. Restart your xbox up and go to the dashboard and test your xbox live connection.

7. You should have OPEN NAT now.


Now before we did all that everything was under the control of your router.

Example of this:

You have 2 pc's and an xbox all going thru moderate or strict NAT so hackers and what not can't get into your system very easily.

After your xbox has open NAT your router no longer has any control over it but it still has total control over your pc's, therefore keeping them very safe.

If none of the above has helped so farpost your question or you may be forced to go buy a live compatible router. TYhe list of compatible routers is at xbox.com.


Multiple Xbox's Info.

D-Link has a DGL-4100 > Broadband Gigabit Gaming Router

Costs $150 bucks

Visit D-Link.com for more information

Thanks to Pain Relief for info.



As fopr ppl in dorms or at universities.

Many colleges have their internet setup so only "computer connections" can go thru and use their internet.

The only way to get past this with an xbox is "bridge"()no not cheat lol) your connection thru your computer so it looks like a computer connection and not an xbox.
I will not go into any detail of how to do this so don't ask:

Next Port-Forwarding

You need to open up

3074 UDP
3074 TCP
88 UDP

Thanks to Savj14 for port numbers.

Xbox-Live List of Compatible Routers:

http://www.xbox.com/en-US/support/co.../xbox360/homen etworking/equipment.htm#Routers

For anyone having problems downloading info from H3 server:

http://admin.bungie.net/Forums/posts...stID=13188927& ;postRepeater1-p=1#13189045
Damn this is waaaay too hard
roll.gif
 
Originally Posted by HybridSoldier23

Originally Posted by calibeebee

Damn this is waaaay too hard
roll.gif

Dude are you serious?

Here's a link with PICTURES

http://portforward.com/english/routers/port_forwarding/Netgear/WNR2000/Xbox_Live_360.htm

Open these ports up and your NAT should be fine.
I know I know, my problem is that I can't figure out how to get to my router information.  I've tried entering my IP address of the router into my web browser and it doesn't do anything at all.  Plus the Indian Tech support people can't understand what I'm trying to say.
mad.gif
 
Originally Posted by calibeebee

Originally Posted by HybridSoldier23

Originally Posted by calibeebee

Damn this is waaaay too hard
roll.gif

Dude are you serious?

Here's a link with PICTURES

http://portforward.com/english/routers/port_forwarding/Netgear/WNR2000/Xbox_Live_360.htm

Open these ports up and your NAT should be fine.
I know I know, my problem is that I can't figure out how to get to my router information.  I've tried entering my IP address of the router into my web browser and it doesn't do anything at all.  Plus the Indian Tech support people can't understand what I'm trying to say.
mad.gif
What did you enter?
 
I entered the number of the IP address that I am connected to.
 
yes, exactly what? did you enter it correctly? did you do the router ip address or your pc's by accident? if so power cycle the router and try again.
 
Originally Posted by calibeebee

I entered the number of the IP address that I am connected to.
if you dont know the ip address of the router, most netgears you can access the page by going to routerlogin.net and then entering "admin" and then "password". if that doesnt work and 192.168.0.1 or 192.168.1.1 doesn't work, try using the reset button on the router to get the factory defaults back. you should be able to get in then.
 
Originally Posted by back1ntheday

Originally Posted by calibeebee

I entered the number of the IP address that I am connected to.
if you dont know the ip address of the router, most netgears you can access the page by going to routerlogin.net and then entering "admin" and then "password". if that doesnt work and 192.168.0.1 or 192.168.1.1 doesn't work, try using the reset button on the router to get the factory defaults back. you should be able to get in then.
thank you thank you
 
Back
Top Bottom